•
Remove the bottom screws (3) directly.
•
Remove the tail/stop lamp lens from
the body cover by removing the cap plugs
(1) and the upper screws (2).
Tail/Stop lamp bulb
(1) Cap plugs (2) Upper screws
(3) Bottom screws (4) Rubber tip
•
Remove the bulb (5) from bulb holder by
pressing in and turning counterclockwise.
(5) Tail/stop lamp bulb
5
•
Install the tail/stop lamp lens and screws.
Install the cap plugs with the rubber tip (4)
facing inwards in the upper screws boss.
•
Install a new tail/stop lamp bulb (5) in the
reverse order of removal.
•
Remove the bulb (1) from bulb holder by
pressing in and turning counterclockwise.
Rear turn signal bulb
•
Follow the above sequence.
(1) Rear turn signal lamp bulb
1
2
1 4
3
•
Remove the bulb (1) by turning it to
counterclockwise direction.
•
Remove the headlamp case (page 36).
•
Install a new bulb and then lens in the
reverse order of removal.
Front turn signal bulb
63
To Next Page
Loading...
