EasyManua.ls Logo

HERO SPLENDOR+ - RIGHT HANDLEBAR CONTROLS; Starter Switch and i3 s Operation; i3 s (IDLE STOP START SYSTEM); i3 s System Engine Start Procedure

HERO SPLENDOR+
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Never hold electric starter switch continuously
more than 5 seconds as continuous cranking
of engine will drain the battery.
During electric or clutch start, the engine will
cut-off if engine reaches 900 r/min if the
relay is engaged for more than 5 seconds.
CAUTION
!!
There is an i3s switch provided to enable (2)
the rider for turning i3s mode “ON” or “OFF”
based on the traffic conditions.
2. i3s switch
Keep the i3s switch (1) to “OFF” position.
Turn the ignition key to “ON” position. the
i3s (IDLE STOP START SYSTEM)
Starting & Warm up the engine:
i3s indicator (2) will glow on the speedometer
console for 2 seconds and turn “OFF”. Start
the engine and let it idle for 2-3 minutes.
(1) i3s switch
(2) i3s indicator
2
1
(1) Electric starter switch (2) i3s switch
(b) Right handlebar controls
1. Electric starter switch ( )
operating the starter switch. Release starter
switch after the engine has started.
Ensure starter switch (1) is operated when the
vehicle is in neutral gear. If the vehicle is
engaged in gear press the clutch lever before
1
2

Related product manuals