EasyManua.ls Logo

HERO SPLENDOR+ - STARTING THE ENGINE; Engine Starting Procedure and Controls

HERO SPLENDOR+
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
WARNING
!!
Never run the engine in a closed area, the exhaust contains poisonous gases.
NOTE
Never attempt to kick start while vehicle is moving forward or backward. This may lead to
damage to the product and is not safe as well.
To start the engine in any gear position using the electric starter, press the clutch lever and
push the starter switch.
Kick starting will not be possible when the transmission gears are engaged. Shift the
transmission into neutral before kick starting.
STARTING THE ENGINE
5. Pull the choke lever
upwards to ON
position as indicated
(Use choke during cold
conditions)
(Alternatively kick starter
pedal can be used for
starting).
6. Open the t hrottle
slightly & press the
starter switch.
7. Push the choke lever
downwards to "OFF"
position as indicated,
after the engine gets
sufficiently warmed-up
to have a stable throttle
response.
2. Turn the fuel valve
“ON”.
1. Turn the ignition
switch “ON”.
3. S e l e c t n e u t r a l
position & check N
indicator glows on
instrument cluster
with ignition “ON”.
4. Make sure whether
the i3s switch is
in “ON” or “OFF”
position.

Related product manuals