20
•
Steering-Check for smooth action and
for easy maneuverability.
•
Side stand indicator-Make sure that the
side stand is up. If it is in down position the
side stand indicator (page18) will glow on
the speedometer panel.
•
Fitting & Fasteners-Check & tighten if
necessary.
•
Drive chain-Check condition and
slackness (page 37). Adjust and lubricate if
necessary.
•
Throttle-Check for smooth opening and
closing in all steering positions (page 37).
•
Lamps and Horn-Check that headlamp,
tail/stop lamp, turn signal lamps and horn
function properly.
•
Rear view mirror-Ensure that the rear
view mirror gives a good rear view when you
are sitting on the vehicle.
•
i3s system-Make sure that i3s system is
functional properly (page 15).
•
i3s switch-Make sure whether the i3s
switch is in “ON” or “OFF” position
(page 15).
•
Engine oil level-Check and top up engine
oil if required (page 29). Check for leaks.
Clean your vehicle regularly. It protects the
surface finish. Avoid cleaning with products
that are not specifically designed for vehicle
surfaces.
•
Tyres-Check condition and pressure
(page 46).
•
Fuel level-Ensure sufficient fuel is available
in the fuel tank for your journey (page 16).
Check for leaks.
PRE-RIDE INSPECTION
You should conduct pre ride inspection before
riding the vehicle to enhance riding comfort
and safety.
Inspect your vehicle every day before you start
the engine. The items listed here will only take
a few minutes, and in the long run they can
save time, expense and possibly your life.
Please follow the tips as given below:
•
Front and rear brake-Check for
operation. adjust free play if necessary
(page 40).
•
Clutch-Check for smooth operation.
Adjust free play (page 36).
To Next Page
Loading...
