HERO SPLENDOR+ - PARKING THE VEHICLE; Vehicle Parking and Securing Procedure

CAUTION
!!
•
Park the vehicle on firm level surface to
prevent overturning.
•
While parking on side stand engage the first
gear.
To store some utility items a utility box has
been provided.
To open, insert the key (1), rotate it
clockwise, pull the cover (2), and slide it
sideways to disengaged it from the hook (3).
UTILITY BOX
•
Pin spanner-1 No.
•
Grip-1 No.
•
+, - No. 2 driver-1 No.
TOOL KIT/FIRST AID KIT
and parts replacement can be performed with
the tools contained in the kit.
•
Tool bag -1 No.
To close, engage the hook and press gently.
Hold the key in clockwise direction, slide the
cover back and release the key.
Kit consists of following tool:
The tool kit (1) is stored in the utility box.
Some emergency repairs, minor adjustments
•
Box wrench P16 x14-1 No.
1
3
2
(1) Key (2) Cover (3) Hook
PARKING
After stopping the vehicle, shift the
transmission into neutral, turn the fuel valve
“OFF”, turn the ignition switch “OFF”, park
the vehicle on main stand, lock the steering
and remove the key.
23
WARNING
!!
•
Extreme braking may cause wheel locking
and reduce control over the vehicle.
•
Wherever possible, reduce speed or apply
brake before entering a turn, closing the
throttle or braking in mid turn may cause
wheel slip. Wheel slip will reduce control
over the vehicle.
•
All your actions should be smooth under these
conditions. Sudden acceleration, braking or
turning may cause loss of control. For your
safety, exercise extreme caution when
braking, accelerating or turning.
•
When riding in wet, rainy or loose surface,
use front brake carefully after applying rear
brake to avoid wheel slip.
•
When descending a long steep slope use
engine braking (power) by changing to lower
gears, with intermittent use of both brakes.
Continuous brake application can overheat
the brakes and reduce their effectiveness.
•
When riding in wet or rainy conditions, or on
loose surfaces the ability to stop the vehicle
reduces.