EasyManua.ls Logo

HERO SPLENDOR+ - FUSE REPLACEMENT PROCEDURE; Fuse Box and Fuse Replacement Steps; STOP LAMP SWITCH ADJUSTMENT; Stop Lamp Switch Adjustment

HERO SPLENDOR+
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
Look for :
Bumps or bulges in the side of the tyre or
the tread. Replace the tyre if you find any
bumps or bulges.
Cuts, splits or cracks in the tyre. Replace the
tyre if you can see fabric or cord.
Whenever you check the tyre pressure, you
should also examine tyre treads & side walls
for wear, damage & foreign objects:
Inspection
Excessive tread wear.
(1) Tread wear indicator (2) Arrow mark
1
Also, if you hit a pothole or hard object, pull to
the side of the road as soon as you safely can
and carefully inspect the tyres for damage.
Replace tyres immediately when the tyres get
worn upto the wear indicator (1) on the tyre.
The tread limits are :
Front:1.0 mm Rear: 1.0 mm
Unidirectional tyres
Ensure the arrow mark (2) on the tyre is in
the same direction as that of forward rotation
of the wheel, whenever the tyre is removed
and put back in case of puncture.
Check the tread wear indicator for tyre wear.
Tread wear
2

Related product manuals