Hertz S8 DSP - 7.5.3 Passive Crossover Selection

29
USER’S MANUAL /
How Passive crossover
Selection looks like in
Motorcycle mode .
How Passive crossover
Selection looks like in Car
mode
7.5.3. PASSIVE CROSSOVER SELECTION - OUTPUT CHANNELS ASSIGNMENT / OUTPUT CHANNELS NAME
- Passive crossover selection:
In Motorcycle or Car mode it is possible to indicate the presence of passive crossovers by enabling
the 2Ways / 3Ways options.
E.g.: the front 3-way can be operated as:
- multi-amplified (6 output channels would be needed);
- passive mid-highs + separately amplified woofer (4 output channels would be needed);
- 3-way passive (2 output channels would be needed).
Remark: During the selection, the software will automatically signal the return to the limit of the 8 output
channels, making the vehicle image turn from red to white and the Next button will appear.
- press Next to continue with the configuration.
- press Back to go back to the previous window.
- press Cancel to cancel the operation.
7