Hertz S8 DSP - 3. Preferential Preset

50
USER’S MANUAL /
- press Back to go back to the Remote menu.
- press Close to go back to the main window.
Shut off delay
it is the delay between the deactivation of the REMOTE OUT signal towards the amplifiers and the switching
off of the S8 DSP. It is generally not necessary to act on this parameter but it can be useful if you have amplifiers
that produce a “Bump” when turned off.
8
3. Preferential preset
It provides the ability to associate a memory to the available inputs (see section 8.3) .
Select Analog Input to associate a memory from A to D to the Analog input.
Select Digital Input to associate a memory from A to D to the Digital input.
- press Back to go back to the previous menu.
- press Close to go back to the main window.