USER MANUAL | NOVA TRANSMITTERS
21
8. Theory of Operation
Your NOVA transmitter works with a receiving device to transfer machine control commands via radio frequency to your
machine. The transmitter electronically generates a carrier frequency that allows it to communicate with the receiver without the
use of cables or wires. The receiver then converts the carrier frequency information into discrete machine control outputs that
interface with your machine’s controls. Each transmitter and receiver that comprises a system is programmed with a unique
address code. The receiver only accepts commands from the transmitter with the same address code. This code ensures that
machine operations are safe, and that other remote control equipment cannot unintentionally control your machine. The
receiver and transmitter have the unique address code set at the factory.
To Next Page
Loading...
