USER MANUAL | NOVA XL 4.3
1
Transmitter Nova XL 4.3
Layout Options
Powering ON your Transmitter
Refer to Section 4.3.
Stopping your Transmitter
Refer to Section 4.6.
Powering OFF your Transmitter
Refer to Section 4.7.
Auto-Off Timer
The coder can be set with a 10-minute timer which will switch off the transmitter when no activity is detected.
Battery State-of-Charge Signals
The onboard buzzer starts beeping fast when the battery reaches 3.4V and the LED starts blinking RED at the same rate indicating that
the coder will soon switch off.
The battery level indicator on the TFT also alerts the user that the battery is being depleted.
TFT Display
The TFT screen layout can be modified according to the user’s preferences using the Hetronic Graphics Programming tool.
NOTE: The Protective film covering the TFT can be replaced if scratched or broken. Refer to the instructions in Appendix C.
The default TFT display is divided into several segments:
To Next Page
Loading...
