USER MANUAL | NOVA XL 4.3
4
Cable Back-up
Cable control on Nova-XL 2.8 transmitters is possible through a connector plug installed on the side of the transmitter. The battery may be
left inside the battery compartment as the coder will automatically detect the presence of the cable, thus disable all wireless activity, and
recharge the battery if this is left inside the battery compartment in the transmitter.
Refer to Section 6.9 for more details.
Accessories and Spare Parts
The standard belts for the NOVA XL 2.8 transmitter are the neck and belly belt and these can be obtained with or without the cushion and
with or without the logo.
Refer to the online web shop for respective part numbers of any other parts that may need replacement:
https://shop.hetronic.com.mt/en/home
NOTE: Any service/maintenance work and replacement of parts must be carried out by an authorized dealer or service centre specified by
Hetronic.
To Next Page
Loading...
