USER MANUAL | NOVA XXL 4.3
2
1. The Field Strength (only for systems with feedback)
The field strength indication provides information about the quality of the radio connection. The field strength indication is always visible
when the transmitter is switched on. With a perfect connection quality, all 4 bars of the indication are displayed. As the quality of the
connection weakens, the reception signal shows less bars depending on how low the quality of the connection is.
If the ‘COM error” page is displayed, this means that there is feedback failure i.e. the transmitter is not receiving s ignals from the receiver.
When this happens there is an imminent risk of losing radio connection thus it is important to check that there are no obstacles blocking the
connection and that the units are within the range of the radio system.
2. Battery Level
The battery level indicator provides information about the current condition of the battery. It is always visible when the transmitter is
switched on. As the battery status weakens, the battery level indicator is displayed as a depleting battery until it starts flickering which
indicates that it needs to be charged and replaced.
3. Feedback
The feedback function is used to transmit information from the machine or receiver to the transmitter. A number of symbols/graphics or a
combination with lines of text are available for displaying feedback information. Contact a Hetronic dealer for information on how to display
feedback accordingly.
4. STOP
The STOP screen is displayed whenever the Transmitter is in STOP mode. This can be achieved when in Active (User manually activates
the Stop button #6) or Passive Stop (Transmitter is outside the Antenna reception range or an error occurs).
To Next Page
Loading...
