Hettich EBA 20 - Page 29

29/31
Manufacturer
Andreas Hettich GmbH & Co. KG
D-78532 Tuttlingen
Model EBA 20 C
Type 2002-C 2002-01C
Mains voltage (± 10%) 208 - 240 V 1∼ 100 - 120 V 1∼
Mains frequency 50 - 60 Hz 50 - 60 Hz
Connected load 90 VA 100 VA
Current consumption 0.4 A 0.8 A
Max. capacity
2 x CellPaker
®
containers each with 10 ml blood
Allowed density
1.2 kg/dm
3
Speed (RPM) 4500
Force (RCF) 1472
Kinetic energy 850 Nm
Obligatory inspection (BGR 261) no
Ambient conditions (EN 61010-1)
− Set-up site
Indoors only
− Altitude
Up to 2000 m above sea level
− Ambient temperature
2°C to 40°C
− Humidity
Maximum relative humidity 80% for temperatures up to 31°C, linearly
decreasing to 50% relative humidity at 40°C.
− Excess-voltage category
(IEC 60364-4-443)
ΙΙ
− Pollution degree
2
Device protection class
Ι
Not suitable for use in explosion-endangered areas.
EMC
− Emitted interference (suppression
of radio interference)
EN 55011,
Group 1, Class B
EN 61000-3-2
EN 61000-3-3
FCC Class B
− Interference immunity
EN 61000-6-1 ----
Noise level (dependent on rotor)
≤ 63 dB(A)
Dimensions
− Width
230 mm
− Depth
304 mm
− Height
216 mm
Weight approx. 4 kg