Chapter
6
6 Required Equipment
The following chapter will provide a list of required equipment needed to install the 4U60 Storage Enclosure.
6.1 Required Equipment for Installation
Before you begin the installation, ensure that you have the following items:
• Number 2 Phillips-head screwdriver with torque measuring capabilities
Note: A 8-inch to 12-inch long screwdriver is recommended for the install of the
rail kit.
• Level
• ESD wrist strap or other grounding device
• Antistatic mat or antistatic foam
17
Installation Guide 6 Required Equipment
To Next Page
Loading...
Need help?
General