HGST G460-J-12 Installation Guide

Note: Ensure the inner rail stamp marked Front is pointing towards the front of the
enclosure.
Figure 13: Lining up the Inner Rail
3.
To lock the inner rail into place, slide the inner rail towards the rear of the chassis.
Note: The clip closest to the rear of the chassis will make an audible click when you slide the rail into
place.
Figure 14: Locking Inner Rail
36
Installation Guide 11 Installing the 4U60 Storage Enclosure

HGST G460-J-12 Specifications

General

Brand	HGST
Model	G460-J-12
Category	Enclosure
Language	English