Hi-Target V30 - Page 28

General Operations
24
4. Radio Channel (must be in UHF mode. Long press F2 to
enter radio channel setting. Then single press F1 to choose
channel by minus 1; or long press F1 to choose channel by
minus 10; or single click F2 by plus 1; or long press F2 by plus
10. After that single click power button to confirm. If no
confirming within 10 seconds, the receiver will automatically
confirm the current settings.）:
● on ○ off
Channel
Satellite led
(green led）
Status led
(green led of
dual-color
led)
Data led
(red led of
dual-color
led)
Power led
(red led of
dual-color
led)
Power led
(green led of
dual-color
led)
0 ○ ○ ○ ○ ○
1 ● ○ ○ ○ ○
2 ○ ● ○ ○ ○
3 ● ● ○ ○ ○
4 ○ ○ ● ○ ○
5 ● ○ ● ○ ○
6 ○ ● ● ○ ○
7 ● ● ● ○ ○
8 ○ ○ ○ ● ○
9 ● ○ ○ ● ○