Hi-Target V30 User Manual

V30 GNSS RTK System Manual
23
no confirming within 10 seconds, the receiver will
automatically confirm the current settings.）:
● on ○ off
Data link
Satellite led
(green led）
Status led
(green led of dual-color led）
UHF/GSM/CMDA
module
● ○
Internal
GSM/CMDA
○ ●
External ● ●
3. Transmitting Power (must be set in UHF mode. Long press
F1 to enter transmitting power setting, then single click F1 to
choose among high, middle, and low. After that single click
power button to confirm. If no confirming within 10 seconds,
the receiver will automatically confirm the current settings.）:
● on ○ off
Choice
Satellite led
(green led）
Status led
(green led of dual-color led）
Low ● ○
Middle ○ ●
High ● ●

Hi-Target V30 Specifications

General

Brand	Hi-Target
Model	V30
Category	Receiver
Language	English