HID ENTRYPROX - 8 Changing Operating Parameters; 9 Wiegand Mode; 10 Programming Commands; 11 LED;Sounder Status Indications

Page 4 of 38 September 2016
EntryProx User Manual, 4045-905, Rev. C.4
8 Changing Operating Parameters ........................................................................................ 29
8.1 Changing the Main Relay Time ......................................................................................................... 29
8.2 Invalid PIN Lockout ............................................................................................................................. 29
8.3 Resetting the Master Cod and System Defaults Only ............................................................... 30
8.4 Erasing Entire Memory/Resetting System Defaults ................................................................... 30
8.5 Turning KeyPress Audible Feedback On/Off............................................................................... 30
8.6 Turning Keypress Visual Feedback On/Off ................................................................................... 31
8.7 Auto Entry Enable ................................................................................................................................ 31
9 Wiegand Mode ...................................................................................................................... 32
9.1 PIN Code Output In Wiegand Mode ............................................................................................... 32
9.2 LED Control Options for Wiegand Mode ...................................................................................... 32
10 Programming Commands .................................................................................................... 33
11 LED/Sounder Status Indications ........................................................................................ 36
Appendix: A Users Chart for Record Keeping .................................................................... 37