HID FARGO DTC4500e - Page 11

October 2013
Page 11 of 83
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC4500e Card Printer User Guide, PLT-01669, 1.0
Term Function
Accepted Standard Card
Sizes
• CR-80 edge-to-edge (3.36"L x 2.11"W / 85.3mmL x 53.7mmW)
•
CR-79 (3.3”L x 2.04”W / 83.8mmL x 51.8mmW)
Accepted Card Thickness
.009” - .040” / 9 mil – 40 mil / .229mm – 1.016mm
Accepted Card Types
PVC or polyester cards with polished PVC finish; monochrome resin required for
100% polyester cards; optical memory cards with PVC finish; rewrite
Input Hopper Card
Capacity
Single hopper: 100 cards (.030” / .762.mm)
Dual hopper:
200 cards (.030” / .762 mm)
Output Hopper Card
Capacity
100 cards (.030” / .762.mm)
Reject Hopper Card
Capacity
100 cards (.030” / .762.mm)
Card Cleaning Card cleaning roller integrated into the ribbon cartridge.
A new cleaning roller is included with each ribbon cartridge.
Printer Memory
32MB RAM
Operating Systems
Windows® XP / Vista™ (32 bit & 64 bit) / Server 2003 & 2008 / Windows® 7 (32 &
64 bit) / Windows® 8 (32 & 64 bit) / Linux®
Interface
USB 2.0 and Ethernet with internal print server
Operating Temperature
65 degrees to 80 degrees F / 18 degrees to 27 degrees C
Humidity
20-80% non-condensing
Weight
Single-Sided: 8 lbs. / 3.63 Kg; Dual-Sided: 10 lbs. / 4.54 Kg
Agency Listings
Safety: UL 60950-1, CSA C22.2 (60950-1), and CE; EMC; FCC Class A, CRC
c1374, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KCC
Supply Voltage
100-240 VAC, 1.6 A
Supply Frequency
50 Hz / 60 Hz
Warranty
Printer – Two years; Printhead – Two years, unlimited pass with UltraCard™
Encoding Options
Supported
125kHz (HID Prox) reader
13.56 MHz (iCLASS, MIFARE, ISO 14443 A/B, ISO 15693) read/write encoder
Contact Smart Card Encoder reads from and writes to all ISO7816 1/2/3/4 memory
and microprocessor smart cards (T=0, T=1) as well as synchronous cards
ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1,2 and 3
Options Single Wire Ethernet and USB 2.0 Interface for inline printing and encoding
• Single wire Ethernet encoding is only available for iCLASS and Contact
Smart Card encoding)
• Dual-Sided Printing Module – Upgradable
• Dual Input Card Hopper – Upgradable (DTC4000)
• Same-Side Input / Output Card Hopper – Upgradable (DTC4000)
• Smart Card Encoding (contact / contactless) – Upgradable
• Magnetic Stripe Encoding – Upgradable
•
Printer Cleaning Kit
Software
Swift ID™ Embedded Badging Application, FARGO Workbench Diagnosis Utility
Display
Graphical Display