HID FARGO DTC4500e - 2.6 Printer Power

Page 22 of 83
October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC4500e Card Printer User Guide, PLT-01669, 1.0
2.6 Printer Power
To connect power to the printer, follow this procedure.
Note: Do not connect the printer’s USB cable until prompted during the printer driver
installation.
Step Procedure
1
Plug the AC adapter power cable into the back of the printer
2
Plug the wall power cable into the AC power adapter.
3
Plug the wall power cable into a standard 100-240VAC power wall outlet.
4
Press the printer’s power button to power on the printer.
Note: The printer will power down during the ‘sleep time’ but will automatically power up when a print
job is sent.