HID FARGO DTC4500e - 1.3 Technical Specifications

Page 10 of 83
October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC4500e Card Printer User Guide, PLT-01669, 1.0
符号 涉及安全的重要过程
环境保护(中国-
RoHS
)
环保使用期是基于本产品用于办公环境。
Environmental Protection Use Period is based on the product being used in an
office environment.
1.3 Technical Specifications
Term Function
Print Method
Dye Sublimation / Resin Thermal Transfer
Print resolution
300 dpi (11.8 dots/mm); continuous tone
Colors
Up to 16.7 million colors / 256 shades per pixel
Print Ribbon Options
• Full-color with resin black and overlay panel, YMCKO*, 250 prints
• Full-color half-panel with resin black and overlay panel, YMCKO*, 350 prints
• Full-color with two resin black panels and overlay panel, YMCKOK*, 200
prints
• Full-color with fluorescing, two resin black panels and overlay panel,
YMCFKO*, 200 prints
• Full-color with fluorescing, two resin black panels and overlay panel,
YMCFKOK*, 175 prints
• Resin black and overlay panel, KO*, 500 prints
• Dye-sublimation black and overlay print, BO*, 500 prints
• Resin black (standard and premium), 1000 prints
• Resin green, blue, red, white, silver and gold, 1000 prints
• Rewrite technology – No ribbon is required
* Indicates the ribbon type and the number of ribbon panels printed where
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing Resin
Print Speed
• 7 seconds per card (K*)
• 12 seconds per card (KO*)
• 24 seconds per card (YMCKO*)
• 31 seconds per card (YMCKOK*)
• Print speed indicates an approximate batch print speed and is measured
from the time a card feeds into the printer to the time it ejects from the
printer.
• Print speeds do not include encoding time or the time needed for the PC to
process the image.
• Process time is dependent on the size of the file, the CPU, amount of RAM
and the amount of available resources at the time of the print.
* Indicates the ribbon type and the number of ribbon panels printed where
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing Resin
Card Size and Types
Supported
• CR-80 (3.375"L x 2.125"W / 85.6mmL x 54mmW)
•
CR-79 (3.313”L x 2.063”W / 84.1mmL x 52.4mmW