November 2015 PLT-02496, Version: 1.0
Specifications Page 1-7
Encoding Options
Supported
• 125kHz (HID Prox) reader
• 13.56 MHz (iCLASS, MIFARE, ISO 14443 A/B, ISO 15693) read/write
encoder
• Contact Smart Card Encoder reads from and writes to all ISO7816 1/2/3/4
memory and microprocessor smart cards (T=0, T=1) as well as
synchronous cards.
• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1,2
and 3
Hopper (input) Card
Capacity
Single hopper: 100 cards (.030” / .762.mm)
Dual hopper: 200 cards (.030” / .762 mm)
Hopper (output) Card
Capacity
100 cards (.030” / .762.mm)
Hopper (Reject) Card
Capacity
100 cards (.030” / .762.mm)
Interface USB 2.0 and Ethernet with internal print server
Operating Conditions
Operating Temperature: 65° to 80° F (18° to 27° C)
Humidity: 20 - 80% non-condensing
Operating Systems
Windows® XP / Vista™ (32 bit & 64 bit) / Server 2003 & 2008 / Windows® 7 (32
& 64 bit) / Windows® 8 (32 & 64 bit) / Linux®
Options
• Single Wire Ethernet and USB 2.0 Interface for inline printing and
encoding
• Single wire Ethernet encoding is only available for iCLASS and Contact
Smart Card encoding)
• Dual-Sided Printing Module – Upgradable
• Dual Input Card Hopper
• Same-Side Input / Output Card Hopper – Upgradable
• Smart Card Encoding (contact / contactless) – Upgradable
• Magnetic Stripe Encoding – Upgradable
• Printer Cleaning Kit
Print Colors Up to 16.7 million colors / 256 shades per pixel
Print Method Dye-Sublimation/ Resin Thermal Transfer
Print Resolution 300 DPI (11.8 dots per mm); continuous tone
Component Description
To Next Page
Loading...
