HID Fargo DTC5500LMX - Page 12

Page 1-8 Specifications
PLT-02496, Version: 1.0 November 2015
Print Ribbon Options
• Full-color with resin black and overlay panel, YMCKO* (500 prints)
• Full-color half-panel with resin black and overlay panel, YMCKO*
(850 prints)
• Full-color with two resin black panels and overlay panel, YMCKOK* (500
prints)
• Full-color with fluorescing, two resin black panels and overlay panel,
YMCFKO* (500 prints)
• Full-color with fluorescing, two resin black panels and overlay panel,
YMCFKOK* (400 prints)
• Resin black and overlay panel, KO* (1250 prints)
• Dye-sublimation black and overlay print, BO* (1250 prints)
• Resin black (standard and premium) (3000 prints)
• Resin green, blue, red, white (1000 prints)
• Resin silver (2000 prints)
• Resin gold (1000 prints)
• Rewrite technology – No ribbon is required
* Indicates the ribbon type and the number of ribbon panels printed where
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay
F=Fluorescing Resin
Print Speed
• 6 seconds per card (K*)
• 8 seconds per card (KO*)
• 16 seconds per card (YMCKO*)
• 24 seconds per card (YMCKOK*)
• Print speed indicates an approximate batch print speed and is measured
from the time a card feeds into the printer to the time it ejects from the
printer.
• Print speeds do not include encoding time or the time needed for the PC
to process the image.
• Process time is dependent on the size of the file, the CPU, amount of RAM
and the amount of available resources at the time of the print.
* Indicates the ribbon type and the number of ribbon panels printed where
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing Resin
Printer Memory 128 MB RAM
Power Source Voltage,
Amp & Frequency
Supply Voltage/Amp: 100-240 VAC, 1.6A Max
Supply Frequency: 50 Hz and 60 Hz
Ship Weight Single-Sided: 8 lbs. / 3.63 Kg; Dual-Sided: 10 lbs. / 4.54 Kg
Software FARGO Workbench Diagnosis Utility
Warranty
• Printer- 2 years
• Printhead: 2 years unlimited pass with UltraCard™
Component Description