19 - 48
Now we see in detail the possible screens of the ‘user menu’:
On the left you find the screen 1 of the user menu, which allows to set the functioning of the
unit: MANUAL or on TIME BANDS
(this screen does not appear if: the unit is managed from a serial modbus)
- press OK to enter in the modification phase
- press UP and DOWN to modify and with OK you confirm and exit from the modification phase
- press EXIT to exit and come back to the main screen
- press DOWN to shift to the following screen
On the left you find the screen 2 of the user menu, which allows to set the desired humidity
(this screen does not appear if: the unit is managed from a serial modbus or is set on time bands)
- press OK to enter the modification phase
- press UP and DOWN to modify and with OK you confirm and exit from the modification phase
- press EXIT to exit and come back to the main screen
- press UP to come back to the previous screen
- press DOWN to go to the following screen
On the left you find the screen 2 of the user menu, which allows to set the desired temperature
(this screen does not appear if: the unit is managed from a serial modbus or is set on time bands or
there are not options for the heating)
- press OK to enter the modification phase
- press UP and DOWN to modify and with OK you confirm and exit from the modification phase
- press EXIT to exit and come back to the main screen
- press UP to come back to the previous screen
- press DOWN to go to the following screen
On the left you find the screen 4 of the user menu, which allows to manage the alarms
(this screen only appears if: there are alarms present)
- press OK to enter the alarm menu
- press EXIT to exit and come back to the main screen
- press UP to come back to the previous screen
- press DOWN to go to the following screen
On the left you find the screen 5 of the user menu, which allows to program the time-bands
(this screen does not appear if: the unit is managed from a serial modbus or it is set in manual
mode)
- press OK to enter the time-bands menu
- press EXIT to exit and come back to the main screen
- press UP to come back to the previous screen
- press DOWN to go to the following screen
To Next Page
Loading...
