20 - 48
On the left you find the screen 6 of the user menu, which allows the setting of the language
- press OK to enter the modification phase
- press UP and DOWN to modify and with OK you confirm and exit from the modification phase
- press EXIT to exit and come back to the main screen
- press UP to come back to the previous screen
- press DOWN to go to the following screen
On the left you find the screen 7 of the user menu, which allows to set the time and date,
necessary for the correct functioning of time-bands and other functions of the unit
You will modify:
1. the day of the week
2. the hour
3. the minutes
4. the day
5. the month
6. the year
- press OK to enter the modification phase
- press UP and DOWN to modify the set
- press OK to confirm and go to the following modification
- arrived at the last modification, with OK you confirm and exit from the modification phase
- press EXIT to exit and come back to the main screen
- press UP to come back to the previous screen
- press DOWN to go to the following screen
On the left you find the screen 8 of the user menu, which allows to display the status of the unit,
that is to say what is turned on and what is turned off, plus the reading of the temperature and
humidity probes
- press OK to enter the unit status menu
- press EXIT to exit and come back to the main screen
- press UP to come back to the previous screen
- press DOWN to go the following screen
On the left you find the screen 9 of the user menu, which allows to modify the parameters
covered by password
- press OK to enter the screen of password request
- press EXIT to exit and come back to the main screen
- press UP to come back to the previous screen
To Next Page
Loading...
