Hikmicro HABROK Series User Manual

Multi-spectrum Binocular User Manual
12

Press to move the cursor up.

Press to move the cursor down.

Press to confirm and hold it to exit the menu.
2.8 App Connection
Connect the device to the HIKMICRO Sight app via hotspot, then you can
capture picture, record video, or configure parameters on your phone.
Steps
1. Search the HIKMICRO Sight on App Store (iOS System) or Google Play™
(Android System) to download it, or scan the QR code to download and
install the app.
Android System
iOS System
2. Press to show the menu.
3. Go to Advanced Settings, and press or to select .
4. Press to enter the setting interface.
5. Press or to select Hotspot. The hotspot function is enabled.
6. Turn on the WLAN of your phone and connect to the hotspot.
 Hotspot Name: HIKMICRO_Serial No.
 Hotspot Password: Serial No.
7. Open the app and connect your phone with the device. You can view the
interface of device on your phone.
Note

The device cannot connect to the app if you enter wrong password
several times. Refer to Restore Device to reset the device, and connect
the app again.

The device should be activated for the first use. The default password
must be changed after the activation.

Hikmicro HABROK Series Specifications

General

Frame Rate	50 Hz
Pixel Interval	12 μm
Aperture	F1.0
Laser Rangefinder	Yes
Laser Rangefinder Max. Measuring Range	1000 m
Wavelength	905 nm
Protection Level	IP67
Battery Type	Li-ion
Operating Time	6h
Storage Temperature	-40 °C to 70 °C (-40 °F to 158 °F)