EasyManuals Logo

Hikmicro HABROK Series User Manual

Hikmicro HABROK Series
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Multi-spectrum Binocular User Manual
5
2 Preparation
2.1
Install Battery
2.1.1 Battery Instruction
Remove the battery if the device is not used for a long time.
The external rechargeable battery type is 18650, and the battery size
should be 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the
battery capacity is 3200 mAh.
Charge the battery for more than 5 hours before first use.
To ensure better conductivity, if the battery compartment cover gets
dirty, use a clean cloth to wipe the thread.
2.1.2 Battery Installation
Insert the battery into the battery compartment.
Steps
1.
Unlock and open the battery compartment cover.
Figure 2-1 Open the Cover
2.
Insert batteries into the battery compartment as the positive and
negative marks indicate.

Other manuals for Hikmicro HABROK Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hikmicro HABROK Series and is the answer not in the manual?

Hikmicro HABROK Series Specifications

General IconGeneral
Frame Rate50 Hz
Pixel Interval12 μm
ApertureF1.0
Laser RangefinderYes
Laser Rangefinder Max. Measuring Range1000 m
Wavelength905 nm
Protection LevelIP67
Battery TypeLi-ion
Operating Time6h
Storage Temperature-40 °C to 70 °C (-40 °F to 158 °F)

Related product manuals