Hikmicro HABROK Series - Select Scene; Set Palettes

Multi-spectrum Binocular User Manual
18
Figure 3-3 Sharpness Adjustment Comparison
3.6 Select Scene
You can select proper scene according to actual using scene to improve
the display effect.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and press or to select .
3. Press to enter the setting interface.
4. Press or to switch scene.
 Recognition: Recognition refers to recognition mode and is
recommended in normal scene.
 Jungle: Jungle refers to jungle mode and is recommended in
hunting environment.
5. Hold to save settings and exit.
3.7 Set Palettes
You can select different palettes to display the same scene in different
effects.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and press or to select .
3. Press to go to the palettes interface.
4. Press or to select the palettes required, and press to
enable them.