Hikmicro HABROK Series User Manual

Multi-spectrum Binocular User Manual
28
5 General Settings
5.1 Set OSD
This function can display or hide the OSD information on the live view
interface.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select , and press to enter OSD setting
interface.
4. Press or to select the Time, Date, or OSD, and press to
turn on or turn off the selected OSD information.
5. Hold to save and exit.
Note
If you turn off OSD, all OSD information on the live view will not be
displayed.
5.2 Set Brand Logo
You can add brand logo to the live view interface, snapshots, and videos.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select .
4. Press to enable Brand Logo.
5. Hold to save the settings and exit.
Result
The brand logo is displayed at the bottom left of the image.

Hikmicro HABROK Series Specifications

General

Frame Rate	50 Hz
Pixel Interval	12 μm
Aperture	F1.0
Laser Rangefinder	Yes
Laser Rangefinder Max. Measuring Range	1000 m
Wavelength	905 nm
Protection Level	IP67
Battery Type	Li-ion
Operating Time	6h
Storage Temperature	-40 °C to 70 °C (-40 °F to 158 °F)