Hikmicro HABROK Series User Manual

Multi-spectrum Binocular User Manual
24
Note

The selected defective pixel can be magnified and displayed on the
bottom right of the interface.

If the screen OSD blocks the defective pixel, move the cursor to reach
the defective pixel, then the device performs mirror display
automatically.
3.13 Set Infrared Light
The infrared light helps to view targets clearly in dark environment. The
infrared light only works in night mode, auto mode or when the
environment is dark. In other modes, the infrared light does not take effect.
Steps
1. Press to show the menu.
2. Press or to select and press to confirm.
3. Press or to select the light level or set smart IR.
Note
Image overexposure may occur in too bright environment. The smart IR
function helps to adjust the overexposed images by controlling infrared
light intensity, so as to improve the image effect in night mode and dark
environment.
4. Hold to save settings and exit.
Note

Infrared light cannot be turned on if the battery is low.

The infrared light is off in the thermal mode or standby mode.
3.14 Zoom Pro
Zoom Pro refers to zoomed image detail enhancement. When you turn on
this function, the details of zoomed live view image will be enhanced.
Steps
1. Press to show the menu.
2. Press or to select .

Hikmicro HABROK Series Specifications

General

Frame Rate	50 Hz
Pixel Interval	12 μm
Aperture	F1.0
Laser Rangefinder	Yes
Laser Rangefinder Max. Measuring Range	1000 m
Wavelength	905 nm
Protection Level	IP67
Battery Type	Li-ion
Operating Time	6h
Storage Temperature	-40 °C to 70 °C (-40 °F to 158 °F)