Hikmicro HABROK Series - System Settings

Multi-spectrum Binocular User Manual
38
6 System Settings
6.1 Adjust Date
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select .
4. Press to enter the configuration interface.
5. Press to select the year, month, or day, and press or to
change the number.
6. Hold to save settings and exit.
6.2 Synchronize Time
Step
1. Press to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select .
4. Press to enter the configuration interface.
5. Press or to switch the clock system. 24-hour and 12-hour
clock are selectable. If you select 12-hour clock, press , and then
press or to select AM or PM.
6. Press to select the hour or minute, and press or to
change the number.
7. Hold to save settings and exit.
6.3 Set Language
You can select the device language in this function.
Steps