Hikmicro HABROK Series - Burning Prevention; Capture and Video; Capture Picture; Set Audio

Multi-spectrum Binocular User Manual
29
5.3 Burning Prevention
Avoid direct sunlight and enable the burning prevention function to reduce
the risk of sensor damage from the heat.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select .
4. Press to enable or disable the function.
5. Hold to save settings and exit.
5.4 Capture and Video
5.4.1 Capture Picture
In the live view interface, press to capture picture.
Note

When capturing succeeds, the image freezes for 1 second and a prompt
shows on the display.

For exporting pictures, refer to Export Files .
5.4.2 Set Audio
If you turn on the audio function, the sound will be recorded with the video.
When there is too loud noise in the video, you can turn off this function.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and press or to select .
3. Press to enable or disable this function.
4. Hold to save settings and exit.
5.4.3 Record Video
Steps