Hikmicro HABROK Series User Manual

Multi-spectrum Binocular User Manual
39
1. Press to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select .
4. Press to enter the language configuration interface.
5. Press or to select the language as required, and press
to confirm.
6. Hold to save settings and exit.
6.4 Set Unit
You can switch the unit for distance measurement.
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select .
4. Press to enter the unit setting interface. Press or to
select the unit as required.
5. Hold to save settings and exit.
6.5 View Device Information
Steps
1. Press to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select .
4. Press to confirm. You can view the device information such as
version and serial No.
5. Hold to save settings and exit.
6.6 Format
Steps

Hikmicro HABROK Series Specifications

General

Frame Rate	50 Hz
Pixel Interval	12 μm
Aperture	F1.0
Laser Rangefinder	Yes
Laser Rangefinder Max. Measuring Range	1000 m
Wavelength	905 nm
Protection Level	IP67
Battery Type	Li-ion
Operating Time	6h
Storage Temperature	-40 °C to 70 °C (-40 °F to 158 °F)