Hikmicro HABROK Series User Manual

Multi-spectrum Binocular User Manual
14
2. Open the detected disk, copy the upgrade file and paste it to the root
directory of the device.
3. Disconnect the device from your PC.
4. Reboot the device, and the device upgrades automatically. The
upgrading process will be displayed in the main interface.
Caution
During the upgrade package transmission, make sure the device is
connected to your PC. Otherwise, it may cause unnecessary upgrade
failure, firmware damage, etc.

Hikmicro HABROK Series Specifications

General

Frame Rate	50 Hz
Pixel Interval	12 μm
Aperture	F1.0
Laser Rangefinder	Yes
Laser Rangefinder Max. Measuring Range	1000 m
Wavelength	905 nm
Protection Level	IP67
Battery Type	Li-ion
Operating Time	6h
Storage Temperature	-40 °C to 70 °C (-40 °F to 158 °F)