Hikmicro HM-TD3117T-1/Q User Manual

Chapter 5 Arming Schedule and Alarm Linkage
Arming schedule is a customized me period in which the device performs certain tasks. Alarm
linkage is the response to the detected certain incident or target during the scheduled
me.
5.1 Set Arming Schedule
Set the valid
me of the device tasks.
Steps
1.
Click Arming Schedule.
2.
Drag the
me bar to draw desired valid me.
Note
Up to 8 periods can be congured for one day.
3.
Adjust the me period.
-
Click on the selected me period, and enter the desired value. Click Save.
-
Click on the selected
me period. Drag the both ends to adjust the me period.
-
Click on the selected me period, and drag it on the me bar.
4.
Oponal: Click Copy to... to copy the same sengs to other days.
5.
Click Save.
5.2 Linkage Method
Sengs
You can enable the linkage funcons when an event or alarm occurs.
5.2.1
Nofy Surveillance Center
Check Nofy Surveillance Center, the alarm informaon is uploaded to the surveillance center
when an alarm event is detected.
Thermographic Cube Camera User Manual
18

Hikmicro HM-TD3117T-1/Q Specifications

General

Brand	Hikmicro
Model	HM-TD3117T-1/Q
Category	Thermographic Cameras
Language	English