Hikmicro HM-TD3117T-1/Q User Manual

7.2.3 DDE
Digital Detail Enhancement is used to adjust the details of the image. OFF and Normal modes are
selectable.
OFF
Disable this
funcon.
Normal
Set the DDE level to control the details of the image. The higher the level is, the more details
shows, but the higher the noise is.
7.3 OSD
You can customize OSD (On-screen Display) informaon such as device name, me/date, font,
color, and text overlay displayed on video stream.
Go to OSD
seng page: Conguraon → Image → OSD Sengs . Set the corresponding
parameters, and click Save to take eect.
Character Set
Select character set for displayed informaon. If Korean is required to displayed on screen, select
EUC-KR. Otherwise, select GBK.
Displayed
Informaon
Set camera name, date, week, and their related display format.
Text Overlay
Set customized overlay text on image.
7.4 Set Manual DPC
(Defecve Pixel Correcon)
If the amount of defecve pixels in the image is comparavely small and accurate correcon is
needed, you can correct these pixels manually.
Steps
1.
Go to
Conguraon → Image → DPC .
2.
Select manual mode.
3.
Click the
defecve pixel on the image, then a cursor shows on the live view.
4.
Click Up, Down, Le, Right to adjust the cursor posion to the defecve pixel posion.
5.
Click , then click to correct defecve pixel.
Thermographic Cube Camera User Manual
26

Hikmicro HM-TD3117T-1/Q Specifications

General

Brand	Hikmicro
Model	HM-TD3117T-1/Q
Category	Thermographic Cameras
Language	English