Hikmicro HM-TD3117T-1/Q - Set HTTPS

Delete Delete the selected IP address in the list.
5.
Click Save.
10.13.3 Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and identy authencaon,
which improves the security of remote access.
Steps
1.
Go to Conguraon → Network → Advanced Sengs → HTTPS .
2.
Check Enable .
3.
Click Delete to recreate and install
cercate.
Create and install self-signed cercate Refer to Create and Install Self-signed Cercate
Create cercate request and install
cercate
Refer to Install Authorized Cercate
4.
Click Save.
Create and Install Self-signed
Cercate
Steps
1.
Check Create Self-signed Cercate.
2.
Click Create.
3.
Follow the prompt to enter Country/Region, Hostname/IP, Validity and other parameters.
4.
Click OK.
Result
The device will install the self-signed
cercate by default.
Install Authorized
Cercate
If the demand for external access security is high, you can create and install authorized cercate
via HTTPS protocol to ensure the data transmission security.
Steps
1.
Select Create cercate request rst and connue the installaon.
2.
Click Create.
3.
Follow the prompt to input Country/Region, Hostname/IP, Validity and other parameters.
4.
Click Download to download the
cercate request and submit it to the trusted authority for
signature.
5.
Import cercate to the device.
Thermographic Cube Camera User Manual
39