HikRobot CameraLink - Page 78

CameraLink Line Scan Camera·User Manual
68
Parameter
Command
Value
Description
0—off
ExposureTime
w ExposureTime
Value
Set the exposure time.
Eg.w ExposureTime 1000.
r ExposureTime
Read the exposure time.
AutoExposureTime
LowerLimit
w
AutoExposureTimeLow
erLimit x
x:
AutoExposureTimeLo
werLimit
Set auto exposure lower
limit. Eg. w
AutoExposureTimeLowerLimi
t 50.
r
AutoExposureTimeLow
erLimit
Read auto exposure lower
limit.
AutoExposureTime
UpperLimit
w
AutoExposureTimeUpp
erLimit x
x:
AutoExposureTimeUp
perLimit
Set auto exposure upper
limit. Eg. w
AutoExposureTimeUpperLimi
t 100.
r
AutoExposureTimeUpp
erLimit
Read auto exposure upper
limit.
FrameTimeoutTim
e
w FrameTimeoutTime x
x: 33-10000
Set frame timeout time.
Eg. w FrameTimeoutTime 34.
r FrameTimeoutTime
Read frame timeout time.
FrameTimeoutEna
ble
w FrameTimeoutEnable
x
x:
0—disable
1—enable
Set frame timeout enable.
Eg. w FrameTimeoutEnable 0.
r FrameTimeoutEnable
Read frame timeout enable.
PreampGain
w PreampGain
1—x1_0db
2—x2_6db
4—x4_12db
Set gain value, and GainAuto
off function is available.
Eg. w PreampGain 4.
r PreampGain
Read gain value.
DigitalShift
(Enable)
w DigitalShift y or z
x: the value you want
to set
y: write serial port
Set digital shift (enable).
Note: the range of digital