HikRobot CameraLink - Page 81

CameraLink Line Scan Camera·User Manual
71
Parameter
Command
Value
Description
Encoder Counter
Reset
w
EncoderCounterReset x
x: 1
Reset encoder counter. Eg: w
EncoderCounterReset 1.
Encoder Max
Reverse Counter
w
EncoderMaxReverseCo
unter x
x: 0-32767
Set encoder max. reverse
counter. Eg: w
EncoderMaxReverseCounter
1.
r
EncoderMaxReverseCo
unter
Read encoder max. reverse
counter.
Encoder Reverse
Counter Reset
w
EncoderReverseCounte
rReset x
x: 1
Reset encoder reverse
counter. Eg: w
EncoderReverseCounterRese
t 1.
Input Source
w InputSource x
x:
0—Line0
3—Line3
7—EncoderModuleOu
t
Set input source.
Eg: w InputSource 7.
r InputSource
Read input source.
Signal Alignment
w SignalAlignment x
x:
0—RisingEdge
1—FallingEdge
Set signal alignment. Eg: w
SignalAlignment 1.
r SignalAlignment
Read signal alignment.
PreDivider
w PreDivider x
x: 1-128
Set PreDivider. Eg: w
PreDivider 1.
r PreDivider
Read PreDivider.
Multiplier
w Multiplier x
x: 1-32
Set Multiplier.
Eg: w Multiplier 1.
r Multiplier
Read Multiplier.
PostDivider
w PostDivider x
x: 1-128
Set PostDivider. Eg: w
PostDivider 1.