HikRobot CameraLink - Page 83

CameraLink Line Scan Camera·User Manual
73
Parameter
Command
Value
Description
y_4X
0x08010181:Geometr
y_8X
0x0a010181:Geometr
y_10X
r DeviceTapGeometry
Read the camera’s
transmission mode (the
returned value is decimal
system and it needs to be
converted to hexadecimal).
Supported
Baudrates
r SupportedBaudrates
Read supported Baudrates.
UserSetSelector
w UserSetSelector x
x:
0—default
1—userset1
2—userset2
3—userset3
Set selected user parameter.
Eg: w UserSetSelector 2.
r UserSetSelector
x:
0—default
1—userset1
2—userset2
3—userset3
Read selected user
parameter.
UserSetLoad
w UserSetLoad 1
Execute
Load UserSetDefault
parameter.
UserSetSave
w UserSetSave 1
Execute
Save parameters setting to
UserSetSelector.
UserSetDefaultSele
ctor
w
UserSetDefaultSelector
x
x:
0—default
1—userset1
2—userset2
3—userset3
Select default loaded
parameter.
r
UserSetDefaultSelector
Read default loaded
parameter.