ID3000 Series Smart Code Reader User Manual
2
Figure 1-2 Appearance (Type II)
Table 1-1 Appearance Description
It provides power, input/output, Ethernet, and serial port signal. The
interface is designed with screw threads to tighten connection between
the device and cable, and thus avoiding influence caused by vibration.
It is used to adjust focal length manually.
Note
The focus knob may differ by device models, and some models do not
have a focus knob.
It indicates code reading result.
●
The indicator is orange when the device is starting up.
●
The indicator is red after the device is powered on.
●
The indicator is flashing green after the device reads barcodes, and it
is solid green if the device reads barcodes continuously.
To Next Page
Loading...