ID3000 Series Smart Code Reader User Manual
3
It can be replaced with other lens cap. Refer to the device’s
specification for details.
It refers to LED lamps providing light for improving code reading effect.
Note
●
The default color of LED lamps is white. Red, blue and IR are
optional.
●
The quantity of LED lamps may differ by device models.
It refers to the screw between device body and lens cap.
It is used to fix the device to installation position. You should use M4
screw.
It is the power indicator. The indicator is green when the device
operates normally. Otherwise, it is red.
It is the device status indicator. The indicator is green when the device
operates normally. When the device starts up or exception occurs, it is
red.
It is network status indicator. The indicator is flashing green when the
network transmission is normal. Otherwise, it is unlit.
●
When the device is in continuous acquisition mode, press the button
and the device enters trigger mode.
●
When the device is in trigger mode, press the button and the device
triggers once.
To Next Page
Loading...
