Chapter 2 Acvaon
The network keyboard can be acvated by local menu, SADP soware and Web interface.
Steps
1. Connect your network keyboard power supply to an electrical outlet, and turn on the network
keyboard.
2. Set a password and
conrm it.
Warning
• 8 to 16 characters allowed, including at least two of the following: digits, upper case
leers,
lower case leers and special characters.
• STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password
of your own choosing (using a minimum of 8 characters, including upper case
leers, lower
case
leers, numbers, and special characters) in order to increase the security of your
product. And we recommend you reset your password regularly, especially in the high
security system, reseng the password monthly or weekly can beer protect your product.
3. Click Acvate.
DS-1100KI(B) Network Keyboard Quick Start Guide
2