Figure 4-2 Device Management
2. Tap Center Device or IPC/IP Dome as desired.
3. Tap
.
4. Enter device IP address, port, user name, and password.
Note
• The device name is obtained
automacally or can be congured as required.
• If you enable the stream encrypon for the device, you need to enter the vericaon code
when adding the device.
5. Check or uncheck Add Video Recorder Output.
Note
Check Add Video Recorder Output, and the output port type, channel number and other
informaon will be listed in the output port list.
6. Tap OK.
DS-1100KI(B) Network Keyboard Quick Start Guide
5