HIKVISION DS-19A08-F/Kx - Page 133

Control Panel User Manual
133
parameters needed, you can operate according to program command once
again.
4. Exit program mode, the program command is: {*} + {#}.
Q: What is the meaning of LED keypad Arm/Disarm, Operate, Camera
indicators?
A:
LED alarm keypad Arm/Disarm indicator:
Working Status
Indicator Status
Working Status
Indicator Status
Armed
Red, Normally On
Enter
Programming
Green, Blink
Disarmed
Green, Normally
On
Main Operator
Change Password
Green, Blink
LED alarm keypad Operate indicator:
Working Status
Indicator Status
Working Status
Indicator Status
Normal
Green, Normally
On
Keypad Not
Logged In
Red, Blink
System Error
Orange, Blink
Enter
Programming
Green, Blink
Project
Red, Normally On
Change Password
Green. Blink
LED alarm keypad Camera indicator:
Working Status
Indicator Status
Working Status
Indicator Status
Sensor Normal
Off
Sensor Error
Red, Normally On
Sensor Alarm
Red, Blink
Sensor Bypass
Green, Normally
On
LED keypad Camera indicator under Project Mode:
No.
Description
No.
Description
1
Off-hook
5
Send CID Report
2
Dial
6
Receive Alert Sound
3
Alarm Connecter
7
Control Panel Off-hook