HIKVISION DS-2CD2955FWD-IS - Handling Exception; Configuring Line Crossing Detection

User Manual of Network Fisheye Camera
105
6.6.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1. Enter the Exception Settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to select the linkage method taken for exception. For details,
refer to Task 3: Set Linkage Method for Motion Detection in Section 6.6.1.
Figure 6-53 Exception Settings
3. Click Save to save the settings.
6.6.6 Configuring Line Crossing Detection
Purpose:
Line crossing detection function detects people, vehicle or other objects which cross a
pre-defined virtual line, and some certain actions can be taken when the alarm is
triggered.
Steps:
1. Enter the Line Crossing Detection settings interface:
Configuration > Events > Smart Event > Line Crossing Detection
2. Check the checkbox of Enable to enable the function.
3. Select the line from the dropdown list for detection setting.
4. Click the Draw Area button, and a virtual line is displayed on the live video.