User Manual of Network Fisheye Camera
55
Authentication
Purpose:
You can specifically secure the stream data of live view.
Steps:
1. Enter the RTSP Authentication interface:
Configuration > System > Security > Authentication
Figure 6-12 RTSP Authentication
2. Select the Authentication type basic or disable in the drop-down list to enable or
disable the RTSP authentication.
Note: If you disable the RTSP authentication, anyone can access the video stream
by the RTSP protocol via the IP address.
3. Click Save to save the settings.
IP Address Filter
Purpose:
This function makes it possible for access control.
Steps:
1. Enter the IP Address Filter interface:
Configuration > System > Security > IP Address Filter
To Next Page
Loading...
