User Manual of Network Fisheye Camera
117
View Disk Status
3. Define the quota for record and pictures.
(1) Input the quota percentage for picture and for record.
(2) Click Save and refresh the browser page to activate the settings.
Quota Settings
Notes:
Up to 8 NAS disks can be connected to the camera.
To initialize and use the memory card after insert it to the camera, please refer to
the steps of NAS disk initialization.
7.4 Memory Card Detection
Purpose:
With memory card detection, you can view the memory card status, lock your
memory card, and receive notification when your memory card is detected abnormal.
Note: Memory card detection function is only supported by certain types of memory
cards and camera models. If this tab page doesn't show on your web page, it means
either that your camera doesn't support the function, or your installed memory card is
not supported for this function. You can contact the dealer or the retailer for the
information of memory card that supports the function.
To Next Page
Loading...
