User Manual of Network Fisheye Camera
91
Please refer to the actual interface for details.
Day/Night Scheduled Switch
Day/Night scheduled-switch configuration interface enables you to set the camera
parameters for day and night separately, guaranteeing the image quality in
different illumination.
Figure 6-43 Day/Night Scheduled-Switch Setting
Steps:
1. Click the calendar icon to select the start time and the end time of the switch.
Notes:
• The start time and end time refer to the valid time for day mode.
• The time period can start and end on two days in a row. For example, if
you set start time as 10:00 and end time as 1:00, the day mode will be
activated at 10 o'clock in the morning and stopped at 1 o'clock early in
the next morning.
2. Click Common tab to configure the common parameters applicable to the
day mode and night mode.
Note: For the detailed information of each parameter, please refer to
Day/Night Auto-Switch in Section 6.5.1.
3. Click Day tab to configure the parameters applicable for day mode.
4. Click Night tab to configure the parameters applicable for night mode.
To Next Page
Loading...
