User Manual of Network Fisheye Camera
94
Figure 6-45 Privacy Mask Settings
2. Check the checkbox of Enable Privacy Mask to enable this function.
3. Click the Draw Area button to start drawing.
4. Click-and-drag the mouse in the live video window to draw the mask area.
5. Click Stop Drawing to finish drawing.
6. You can click Clear All to clear all the configured privacy masks.
7. Click Save to save the settings.
Note: Up to 4 privacy masks are configurable.
6.6 Configuring Event Settings
This section explains how to configure the network camera to respond to alarm events,
including motion detection, video tampering, alarm input, alarm output, exception,
line crossing detection and intrusion detection, etc. These events can trigger the
linkage methods, such as Notify Surveillance Center, Send Email, Trigger Alarm
To Next Page
Loading...
